Invoke-NSAddQUICProfile
SYNOPSIS
Creates a NetScaler quicprofile resource.
SYNTAX
Invoke-NSAddQUICProfile [-Ackdelayexponent <Int32>] [-ActiveConnectionIdlimit <Int32>]
[-ActiveConnectionMigration <String>] [-Congestionctrlalgorithm <String>] [-InitialMaxData <Int32>]
[-InitialMaxStreamDataBidiLocal <Int32>] [-InitialMaxStreamDataBidiremote <Int32>]
[-InitialMaxStreamDataUni <Int32>] [-InitialMaxStreamsbidi <Int32>] [-InitialMaxStreamsuni <Int32>]
[-MaxAckdelay <Int32>] [-MaxIdleTimeout <Int32>] [-MaxUDPDataGramsperburst <Int32>]
[-MaxUDPPayloadsize <Int32>] [-Name] <String> [-NewtokenvalidiTypeRiod <Int32>]
[-RetrytokenvalidiTypeRiod <Int32>] [-Statelessaddressvalidation <String>] [-Session <PSObject>]
[-IgnoreNotFound] [-ReturnNullOnNotFound] [-ThrowOnWarning] [-PassThru] [-WhatIf] [-Confirm]
[<CommonParameters>]
DESCRIPTION
Configuration for QUIC profile resource.
EXAMPLES
EXAMPLE 1
EXAMPLE 2
PARAMETERS
-Ackdelayexponent
An integer value advertised by the Citrix ADC to the remote QUIC endpoint, indicating an exponent that the remote QUIC endpoint should use, to decode the ACK Delay field in QUIC ACK frames sent by the Citrix ADC. Default value: 3 Minimum value = 0 Maximum value = 20
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False
-ActiveConnectionIdlimit
An integer value advertised by the Citrix ADC to the remote QUIC endpoint, specifying the maximum number of QUIC connection IDs from the remote QUIC endpoint, that the Citrix ADC is willing to store. Default value: 3 Minimum value = 2 Maximum value = 8
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False
-ActiveConnectionMigration
Specify whether the Citrix ADC should allow the remote QUIC endpoint to perform active QUIC connection migration. Default value: ENABLED Possible values = ENABLED, DISABLED
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Congestionctrlalgorithm
Specify the congestion control algorithm to be used for QUIC connections. The default congestion control algorithm is CUBIC. Default value: Default Possible values = Default, NewReno, CUBIC, BBR
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-InitialMaxData
An integer value advertised by the Citrix ADC to the remote QUIC endpoint, specifying the initial value, in bytes, for the maximum amount of data that can be sent on a QUIC connection. Default value: 1048576 Minimum value = 8192 Maximum value = 67108864
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False
-InitialMaxStreamDataBidiLocal
An integer value advertised by the Citrix ADC to the remote QUIC endpoint, specifying the initial flow control limit, in bytes, for bidirectional QUIC streams initiated by the Citrix ADC. Default value: 262144 Minimum value = 8192 Maximum value = 8388608
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False
-InitialMaxStreamDataBidiremote
An integer value advertised by the Citrix ADC to the remote QUIC endpoint, specifying the initial flow control limit, in bytes, for bidirectional QUIC streams initiated by the remote QUIC endpoint. Default value: 262144 Minimum value = 8192 Maximum value = 8388608
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False
-InitialMaxStreamDataUni
An integer value advertised by the Citrix ADC to the remote QUIC endpoint, specifying the initial flow control limit, in bytes, for unidirectional streams initiated by the remote QUIC endpoint. Default value: 262144 Minimum value = 8192 Maximum value = 8388608
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False
-InitialMaxStreamsbidi
An integer value advertised by the Citrix ADC to the remote QUIC endpoint, specifying the initial maximum number of bidirectional streams the remote QUIC endpoint may initiate. Default value: 100 Minimum value = 1 Maximum value = 500
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False
-InitialMaxStreamsuni
An integer value advertised by the Citrix ADC to the remote QUIC endpoint, specifying the initial maximum number of unidirectional streams the remote QUIC endpoint may initiate. Default value: 10 Minimum value = 1 Maximum value = 500
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False
-MaxAckdelay
An integer value advertised by the Citrix ADC to the remote QUIC endpoint, specifying the maximum amount of time, in milliseconds, by which the Citrix ADC will delay sending acknowledgments. Default value: 20 Minimum value = 10 Maximum value = 2000
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False
-MaxIdleTimeout
An integer value advertised by the Citrix ADC to the remote QUIC endpoint, specifying the maximum idle timeout, in seconds, for a QUIC connection. A QUIC connection will be silently discarded by the Citrix ADC if it remains idle for longer than the minimum of the idle timeout values advertised by the Citrix ADC and the remote QUIC endpoint, and three times the current Probe Timeout (PTO). Default value: 180 Minimum value = 1 Maximum value = 3600
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False
-MaxUDPDataGramsperburst
An integer value, specifying the maximum number of UDP datagrams that can be transmitted by the Citrix ADC in a single transmission burst on a QUIC connection. Default value: 8 Minimum value = 1 Maximum value = 256
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False
-MaxUDPPayloadsize
An integer value advertised by the Citrix ADC to the remote QUIC endpoint, specifying the size of the largest UDP datagram payload, in bytes, that the Citrix ADC is willing to receive on a QUIC connection. Default value: 1472 Minimum value = 1252 Maximum value = 9188
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False
-Name
Name for the QUIC profile. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@),equals sign (=), and hyphen (-) characters. Cannot be changed after the profile is created. Minimum length = 1 Maximum length = 256
Type: String
Parameter Sets: (All)
Aliases:
Required: True
Position: 1
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-NewtokenvalidiTypeRiod
An integer value, specifying the validity period, in seconds, of address validation tokens issued through QUIC NEW_TOKEN frames sent by the Citrix ADC. Default value: 300 Minimum value = 1 Maximum value = 3600
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False
-RetrytokenvalidiTypeRiod
An integer value, specifying the validity period, in seconds, of address validation tokens issued through QUIC Retry packets sent by the Citrix ADC. Default value: 10 Minimum value = 1 Maximum value = 120
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False
-Statelessaddressvalidation
Specify whether the Citrix ADC should perform stateless address validation for QUIC clients, by sending tokens in QUIC Retry packets during QUIC connection establishment, and by sending tokens in QUIC NEW_TOKEN frames after QUIC connection establishment. Default value: ENABLED Possible values = ENABLED, DISABLED
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Session
The NetScaler session. If omitted, the current default session is used.
Type: PSObject
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: (Get-NSSession)
Accept pipeline input: False
Accept wildcard characters: False
-IgnoreNotFound
Returns null instead of throwing for known NITRO not-found responses.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-ReturnNullOnNotFound
Returns null instead of throwing for known NITRO not-found responses.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-ThrowOnWarning
Treats NITRO warning responses as terminating errors.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-PassThru
Returns the updated resource after the operation completes.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Confirm
Prompts you for confirmation before running the cmdlet.
Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
INPUTS
OUTPUTS
System.Management.Automation.PSCustomObject
NOTES
Generated from NetScaler NITRO API metadata. Generated: 2026-06-01 21:28 Supported metadata versions: 13.1, 14.1.