Invoke-NSUpdateIP
SYNOPSIS
Updates a NetScaler nsip resource.
SYNTAX
Invoke-NSUpdateIP [-AdvertiseondefaultPartition <String>] [-Arp <String>] [-Arpowner <Int32>]
[-ArpResponse <String>] [-Bgp <String>] [-Decrementttl <String>] [-Dynamicrouting <String>] [-Ftp <String>]
[-Gui <String>] [-HostRoute <String>] [-HostRtgw <String>] [-ICMP <String>] [-ICMPResponse <String>]
[-Ipaddress] <String> [-Metric <Int32>] [-Mgmtaccess <String>] [-MpTCPAdvertise <String>] [-NetMask <String>]
[-Networkroute <String>] [-Ospf <String>] [-Ospfarea <Int32>] [-OspflsaType <String>]
[-OwnerDownResponse <String>] [-Restrictaccess <String>] [-Rip <String>] [-SNMP <String>] [-Ssh <String>]
[-Tag <Int32>] [-TrafficDomain <Int32>] [-Telnet <String>] [-Vrid <Int32>] [-VServer <String>]
[-VServerRhilevel <String>] [-Session <PSObject>] [-IgnoreNotFound] [-ReturnNullOnNotFound] [-ThrowOnWarning]
[-PassThru] [-WhatIf] [-Confirm] [<CommonParameters>]
DESCRIPTION
Configuration for ip resource.
EXAMPLES
EXAMPLE 1
EXAMPLE 2
PARAMETERS
-AdvertiseondefaultPartition
Advertise VIPs from Shared VLAN on Default Partition. Default value: DISABLED Possible values = ENABLED, DISABLED
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Arp
Respond to ARP requests for this IP address. Default value: ENABLED Possible values = ENABLED, DISABLED
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Arpowner
The arp owner in a Cluster for this IP address. It can vary from 0 to 31. Default value: 255
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False
-ArpResponse
Respond to ARP requests for a Virtual IP (VIP) address on the basis of the states of the virtual servers associated with that VIP. Available settings function as follows: * NONE - The Citrix ADC responds to any ARP request for the VIP address, irrespective of the states of the virtual servers associated with the address. * ONE VSERVER - The Citrix ADC responds to any ARP request for the VIP address if at least one of the associated virtual servers is in UP state. * ALL VSERVER - The Citrix ADC responds to any ARP request for the VIP address if all of the associated virtual servers are in UP state. Default value: 5 Possible values = NONE, ONE_VSERVER, ALL_VSERVERS
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Bgp
Use this option to enable or disable BGP on this IP address for the entity. Default value: DISABLED Possible values = ENABLED, DISABLED
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Decrementttl
Decrement TTL by 1 when ENABLED.This setting is applicable only for UDP traffic. Default value: DISABLED Possible values = ENABLED, DISABLED
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Dynamicrouting
Allow dynamic routing on this IP address. Specific to Subnet IP (SNIP) address. Default value: DISABLED Possible values = ENABLED, DISABLED
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Ftp
Allow File Transfer Protocol (FTP) access to this IP address. Default value: ENABLED Possible values = ENABLED, DISABLED
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Gui
Allow graphical user interface (GUI) access to this IP address. Default value: ENABLED Possible values = ENABLED, SECUREONLY, DISABLED
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-HostRoute
Option to push the VIP to ZebOS routing table for Kernel route redistribution through dynamic routing protocols. Possible values = ENABLED, DISABLED
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-HostRtgw
IP address of the gateway of the route for this VIP address. Default value: -1
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-ICMP
Respond to ICMP requests for this IP address. Default value: ENABLED Possible values = ENABLED, DISABLED
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-ICMPResponse
Respond to ICMP requests for a Virtual IP (VIP) address on the basis of the states of the virtual servers associated with that VIP. Available settings function as follows: * NONE - The Citrix ADC responds to any ICMP request for the VIP address, irrespective of the states of the virtual servers associated with the address. * ONE VSERVER - The Citrix ADC responds to any ICMP request for the VIP address if at least one of the associated virtual servers is in UP state. * ALL VSERVER - The Citrix ADC responds to any ICMP request for the VIP address if all of the associated virtual servers are in UP state. * VSVR_CNTRLD - The behavior depends on the ICMP VSERVER RESPONSE setting on all the associated virtual servers. The following settings can be made for the ICMP VSERVER RESPONSE parameter on a virtual server: * If you set ICMP VSERVER RESPONSE to PASSIVE on all virtual servers, Citrix ADC always responds. * If you set ICMP VSERVER RESPONSE to ACTIVE on all virtual servers, Citrix ADC responds if even one virtual server is UP. * When you set ICMP VSERVER RESPONSE to ACTIVE on some and PASSIVE on others, Citrix ADC responds if even one virtual server set to ACTIVE is UP. Default value: 5 Possible values = NONE, ONE_VSERVER, ALL_VSERVERS, VSVR_CNTRLD
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Ipaddress
IPv4 address to create on the Citrix ADC. Cannot be changed after the IP address is created. Minimum length = 1
Type: String
Parameter Sets: (All)
Aliases:
Required: True
Position: 1
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Metric
Integer value to add to or subtract from the cost of the route advertised for the VIP address. Minimum value = -16777215
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False
-Mgmtaccess
Allow access to management applications on this IP address. Default value: DISABLED Possible values = ENABLED, DISABLED
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-MpTCPAdvertise
If enabled, this IP will be advertised by Citrix ADC to MPTCP enabled clients as part of ADD_ADDR option. Default value: NO Possible values = YES, NO
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-NetMask
Subnet mask associated with the IP address.
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Networkroute
Option to push the SNIP subnet to ZebOS routing table for Kernel route redistribution through dynamic routing protocol. Possible values = ENABLED, DISABLED
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Ospf
Use this option to enable or disable OSPF on this IP address for the entity. Default value: DISABLED Possible values = ENABLED, DISABLED
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Ospfarea
ID of the area in which the type1 link-state advertisements (LSAs) are to be advertised for this virtual IP (VIP) address by the OSPF protocol running on the Citrix ADC. When this parameter is not set, the VIP is advertised on all areas. Default value: -1 Minimum value = 0 Maximum value = 4294967294LU
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False
-OspflsaType
Type of LSAs to be used by the OSPF protocol, running on the Citrix ADC, for advertising the route for this VIP address. Default value: TYPE5 Possible values = TYPE1, TYPE5
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-OwnerDownResponse
in cluster system, if the owner node is down, whether should it respond to icmp/arp. Default value: YES Possible values = YES, NO
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Restrictaccess
Block access to nonmanagement applications on this IP. This option is applicable for MIPs, SNIPs, and NSIP, and is disabled by default. Nonmanagement applications can run on the underlying Citrix ADC Free BSD operating system. Default value: DISABLED Possible values = ENABLED, DISABLED
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Rip
Use this option to enable or disable RIP on this IP address for the entity. Default value: DISABLED Possible values = ENABLED, DISABLED
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-SNMP
Allow Simple Network Management Protocol (SNMP) access to this IP address. Default value: ENABLED Possible values = ENABLED, DISABLED
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Ssh
Allow secure shell (SSH) access to this IP address. Default value: ENABLED Possible values = ENABLED, DISABLED
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Tag
Tag value for the network/host route associated with this IP. Default value: 0
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False
-TrafficDomain
Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0. TD id 4095 is used reserved for LSN use . Minimum value = 0 Maximum value = 4095
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False
-Telnet
Allow Telnet access to this IP address. Default value: ENABLED Possible values = ENABLED, DISABLED
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Vrid
A positive integer that uniquely identifies a VMAC address for binding to this VIP address. This binding is used to set up Citrix ADCs in an active-active configuration using VRRP. Minimum value = 1 Maximum value = 255
Type: Int32
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: 0
Accept pipeline input: False
Accept wildcard characters: False
-VServer
Use this option to set (enable or disable) the virtual server attribute for this IP address. Default value: ENABLED Possible values = ENABLED, DISABLED
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-VServerRhilevel
Advertise the route for the Virtual IP (VIP) address on the basis of the state of the virtual servers associated with that VIP. * NONE - Advertise the route for the VIP address, regardless of the state of the virtual servers associated with the address. * ONE VSERVER - Advertise the route for the VIP address if at least one of the associated virtual servers is in UP state. * ALL VSERVER - Advertise the route for the VIP address if all of the associated virtual servers are in UP state. * VSVR_CNTRLD - Advertise the route for the VIP address according to the RHIstate (RHI STATE) parameter setting on all the associated virtual servers of the VIP address along with their states. When Vserver RHI Level (RHI) parameter is set to VSVR_CNTRLD, the following are different RHI behaviors for the VIP address on the basis of RHIstate (RHI STATE) settings on the virtual servers associated with the VIP address: * If you set RHI STATE to PASSIVE on all virtual servers, the Citrix ADC always advertises the route for the VIP address. * If you set RHI STATE to ACTIVE on all virtual servers, the Citrix ADC advertises the route for the VIP address if at least one of the associated virtual servers is in UP state. *If you set RHI STATE to ACTIVE on some and PASSIVE on others, the Citrix ADC advertises the route for the VIP address if at least one of the associated virtual servers, whose RHI STATE set to ACTIVE, is in UP state. Default value: ONE_VSERVER Possible values = ONE_VSERVER, ALL_VSERVERS, NONE, VSVR_CNTRLD
Type: String
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Session
The NetScaler session. If omitted, the current default session is used.
Type: PSObject
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: (Get-NSSession)
Accept pipeline input: False
Accept wildcard characters: False
-IgnoreNotFound
Returns null instead of throwing for known NITRO not-found responses.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-ReturnNullOnNotFound
Returns null instead of throwing for known NITRO not-found responses.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-ThrowOnWarning
Treats NITRO warning responses as terminating errors.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-PassThru
Returns the updated resource after the operation completes.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Confirm
Prompts you for confirmation before running the cmdlet.
Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
INPUTS
OUTPUTS
System.Management.Automation.PSCustomObject
NOTES
Generated from NetScaler NITRO API metadata. Generated: 2026-06-01 21:28 Supported metadata versions: 13.1, 14.1.