Invoke-NSUnsetNSIP6
SYNOPSIS
Clears one or more NetScaler nsip6 resource properties.
SYNTAX
Invoke-NSUnsetNSIP6 [-IPv6Address] <String> [-AdvertiseondefaultPartition] [-Decrementhoplimit]
[-Dynamicrouting] [-Ftp] [-Gui] [-HostRoute] [-ICMP] [-ICMPResponse] [-Ip6HostRtgw] [-Map] [-Metric]
[-Mgmtaccess] [-MpTCPAdvertise] [-Nd] [-NDownEr] [-Networkroute] [-Ospf6lsaType] [-Ospfarea]
[-OwnerDownResponse] [-Restrictaccess] [-SNMP] [-Ssh] [-State] [-Tag] [-TrafficDomain] [-Telnet] [-Vrid6]
[-VServer] [-VServerRhilevel] [-Session <PSObject>] [-IgnoreNotFound] [-ReturnNullOnNotFound]
[-ThrowOnWarning] [-PassThru] [-WhatIf] [-Confirm] [<CommonParameters>]
DESCRIPTION
Configuration for ip6 resource.
EXAMPLES
EXAMPLE 1
EXAMPLE 2
PARAMETERS
-IPv6Address
IPv6 address to create on the Citrix ADC. Minimum length = 1
Type: String
Parameter Sets: (All)
Aliases:
Required: True
Position: 1
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False
-AdvertiseondefaultPartition
Advertise VIPs from Shared VLAN on Default Partition. Default value: DISABLED Possible values = ENABLED, DISABLED
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-Decrementhoplimit
Decrement Hop Limit by 1 when ENABLED.This setting is applicable only for UDP traffic. Default value: DISABLED Possible values = ENABLED, DISABLED
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-Dynamicrouting
Allow dynamic routing on this IP address. Specific to Subnet IPv6 (SNIP6) address. Default value: DISABLED Possible values = ENABLED, DISABLED
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-Ftp
Allow File Transfer Protocol (FTP) access to this IP address. Default value: ENABLED Possible values = ENABLED, DISABLED
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-Gui
Allow graphical user interface (GUI) access to this IP address. Default value: ENABLED Possible values = ENABLED, SECUREONLY, DISABLED
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-HostRoute
Option to push the VIP6 to ZebOS routing table for Kernel route redistribution through dynamic routing protocols. Possible values = ENABLED, DISABLED
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-ICMP
Respond to ICMP requests for this IP address. Default value: ENABLED Possible values = ENABLED, DISABLED
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-ICMPResponse
Respond to ICMPv6 requests for a Virtual IP (VIP) address on the basis of the states of the virtual servers associated with that VIP. Default value: 5 Possible values = NONE, ONE_VSERVER, ALL_VSERVERS, VSVR_CNTRLD
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-Ip6HostRtgw
IPv6 address of the gateway for the route. If Gateway is not set, VIP uses :: as the gateway. Default value: 0
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-Map
Mapped IPV4 address for the IPV6 address.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-Metric
Integer value to add to or subtract from the cost of the route advertised for the VIP6 address. Minimum value = -16777215
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-Mgmtaccess
Allow access to management applications on this IP address. Default value: DISABLED Possible values = ENABLED, DISABLED
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-MpTCPAdvertise
If enabled, this IP will be advertised by Citrix ADC to MPTCP enabled clients as part of ADD_ADDR option. Default value: NO Possible values = YES, NO
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-Nd
Respond to Neighbor Discovery (ND) requests for this IP address. Default value: ENABLED Possible values = ENABLED, DISABLED
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-NDownEr
NdOwner in Cluster for VIPS and Striped SNIPS. Default value: 255
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-Networkroute
Option to push the SNIP6 subnet to ZebOS routing table for Kernel route redistribution through dynamic routing protocol. Possible values = ENABLED, DISABLED
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-Ospf6lsaType
Type of LSAs to be used by the IPv6 OSPF protocol, running on the Citrix ADC, for advertising the route for the VIP6 address. Default value: EXTERNAL Possible values = INTRA_AREA, EXTERNAL
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-Ospfarea
ID of the area in which the Intra-Area-Prefix LSAs are to be advertised for the VIP6 address by the IPv6 OSPF protocol running on the Citrix ADC. When ospfArea is not set, VIP6 is advertised on all areas. Default value: -1 Minimum value = 0 Maximum value = 4294967294LU
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-OwnerDownResponse
in cluster system, if the owner node is down, whether should it respond to icmp/arp. Default value: YES Possible values = YES, NO
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-Restrictaccess
Block access to nonmanagement applications on this IP address. This option is applicable forMIP6s, SNIP6s, and NSIP6s, and is disabled by default. Nonmanagement applications can run on the underlying Citrix ADC Free BSD operating system. Default value: DISABLED Possible values = ENABLED, DISABLED
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-SNMP
Allow Simple Network Management Protocol (SNMP) access to this IP address. Default value: ENABLED Possible values = ENABLED, DISABLED
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-Ssh
Allow secure Shell (SSH) access to this IP address. Default value: ENABLED Possible values = ENABLED, DISABLED
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-State
Enable or disable the IP address. Default value: ENABLED Possible values = DISABLED, ENABLED
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-Tag
Tag value for the network/host route associated with this IP. Default value: 0
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-TrafficDomain
Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0. Minimum value = 0 Maximum value = 4094
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-Telnet
Allow Telnet access to this IP address. Default value: ENABLED Possible values = ENABLED, DISABLED
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-Vrid6
A positive integer that uniquely identifies a VMAC address for binding to this VIP address. This binding is used to set up Citrix ADCs in an active-active configuration using VRRP. Minimum value = 1 Maximum value = 255
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-VServer
Enable or disable the state of all the virtual servers associated with this VIP6 address. Default value: ENABLED Possible values = ENABLED, DISABLED
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-VServerRhilevel
Advertise or do not advertise the route for the Virtual IP (VIP6) address on the basis of the state of the virtual servers associated with that VIP6. * NONE - Advertise the route for the VIP6 address, irrespective of the state of the virtual servers associated with the address. * ONE VSERVER - Advertise the route for the VIP6 address if at least one of the associated virtual servers is in UP state. * ALL VSERVER - Advertise the route for the VIP6 address if all of the associated virtual servers are in UP state. * VSVR_CNTRLD. Advertise the route for the VIP address according to the RHIstate (RHI STATE) parameter setting on all the associated virtual servers of the VIP address along with their states. When Vserver RHI Level (RHI) parameter is set to VSVR_CNTRLD, the following are different RHI behaviors for the VIP address on the basis of RHIstate (RHI STATE) settings on the virtual servers associated with the VIP address: * If you set RHI STATE to PASSIVE on all virtual servers, the Citrix ADC always advertises the route for the VIP address. * If you set RHI STATE to ACTIVE on all virtual servers, the Citrix ADC advertises the route for the VIP address if at least one of the associated virtual servers is in UP state. *If you set RHI STATE to ACTIVE on some and PASSIVE on others, the Citrix ADC advertises the route for the VIP address if at least one of the associated virtual servers, whose RHI STATE set to ACTIVE, is in UP state. Default value: ONE_VSERVER Possible values = ONE_VSERVER, ALL_VSERVERS, NONE, VSVR_CNTRLD
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-Session
The NetScaler session. If omitted, the current default session is used.
Type: PSObject
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: (Get-NSSession)
Accept pipeline input: False
Accept wildcard characters: False
-IgnoreNotFound
Returns null instead of throwing for known NITRO not-found responses.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-ReturnNullOnNotFound
Returns null instead of throwing for known NITRO not-found responses.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-ThrowOnWarning
Treats NITRO warning responses as terminating errors.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-PassThru
Returns the updated resource after the operation completes.
Type: SwitchParameter
Parameter Sets: (All)
Aliases:
Required: False
Position: Named
Default value: False
Accept pipeline input: False
Accept wildcard characters: False
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Type: SwitchParameter
Parameter Sets: (All)
Aliases: wi
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
-Confirm
Prompts you for confirmation before running the cmdlet.
Type: SwitchParameter
Parameter Sets: (All)
Aliases: cf
Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
INPUTS
OUTPUTS
System.Management.Automation.PSCustomObject
NOTES
Generated from NetScaler NITRO API metadata. Generated: 2026-06-01 21:28 Supported metadata versions: 13.1, 14.1.